EN
Shipping and Logistics

How Do You Calculate and Reduce Packaging Cost? A Guide to Packaging per Order, Box Size and Its Shipping Impact, the Filler–Damage Balance, the Bulk Purchase Decision and Packaging Inventory

How do you calculate and reduce packaging cost? Packaging per order, box size and shipping impact, the balance between fill and damage, bulk buying: an 8-lesson guide with examples.

Contents 14 sections
  1. What will you be able to do by the end of this training?
  2. Lesson 1: How is packaging cost per order calculated?
  3. Lesson 2: Where does packaging stand in total cost?
  4. Lesson 3: How does box size change the shipping fee?
  5. Lesson 4: How much does fill reduce the damage rate?
  6. Lesson 5: When does buying packaging in bulk pay off?
  7. Lesson 6: How is packaging stock replenished before it runs out?
  8. Lesson 7: How do you write a box selection rule?
  9. Lesson 8: How is packaging cost monitored?
  10. What are the most common mistakes in managing packaging cost?
  11. How does NetKasam make the packaging and packing process easier?
  12. Mini quiz: Test what you have learned
  13. Conclusion: Count which orders went out in a bigger box than needed this month
  14. Frequently Asked Questions About Packaging Cost

When calculating the cost of an order, the product, commission and shipping are listed one by one, while boxes, tape, fill and labels are squeezed into a single line as "small items" or left out entirely. Yet packaging is both an expense in its own right and a decision that directly drives two large cost items: box size affects the shipping fee, and the amount of fill affects the damage rate. The packaging decision looks small; its impact is large.

This article is not a lecture but an 8-lesson hands-on training. We will answer how to calculate and reduce packaging cost through a business that ships 5,000 orders a month: packaging cost per order, packaging's share next to shipping and damage, the effect of box size on the shipping fee, balancing the fill decision against damage, when bulk buying pays off, tracking packaging stock, the box selection rule and the indicators to monitor. At the end there is a mini quiz with an answer key. We explained how the shipping fee is based on desi in the article how to calculate desi; this article ties that knowledge to the packaging decision.

What will you be able to do by the end of this training?

In short: You will calculate packaging cost per order, see how box size affects the shipping fee, make fill and bulk-buying decisions based on numbers, and replenish packaging stock before it runs out.

Training mapSix steps to managing packaging cost
  1. 01
    CountList the packaging items per order.
  2. 02
    WeighSee packaging's share next to shipping and damage.
  3. 03
    SizeAssign each order to the smallest box it fits in.
  4. 04
    FillAdjust fill for fragile products based on damage.
  5. 05
    BuyCompare bulk buying with the capital it ties up.
  6. 06
    MonitorRead cost per order and damage every month.

The 8 lessons of the training: (1) packaging cost per order, (2) packaging's place in total cost, (3) box size and shipping fee, (4) balancing fill and damage, (5) the bulk-buying decision, (6) packaging stock and order timing, (7) the box selection rule, (8) monitoring indicators.

Lesson 1: How is packaging cost per order calculated?

In short: Packaging cost is the total of all packaging material used in a month divided by the number of orders.

Sample business: 5,000 orders a month. Of these, 2,000 are sized to fit a small box, 2,200 a medium box and 800 a large box, but the business currently stocks only two boxes: medium (₺4.80) and large (₺8.50). Small orders are also put into medium boxes. The other items are the same for every order.

ItemAccountMonthly costPer order
Box4.200 × 4,80 + 800 × 8,5026.960 ₺5,39 ₺
Fill5.000 × 1,608.000 ₺1,60 ₺
Tape5.000 × 0,452.250 ₺0,45 ₺
Label5.000 × 0,603.000 ₺0,60 ₺
Inner bag and protection5.000 × 0,552.750 ₺0,55 ₺
Total42.960 ₺8,59 ₺

That is ₺42,960 a month, ₺515,520 a year. In most businesses, this figure is seen together for the first time: because the items are bought on different invoices, from different suppliers and at different times, nobody knows the total. Recording packaging as a separate expense item is the precondition for calculating cost per order every month. We explained how to track expenses by category in the article how to do an expense analysis.

Lesson 2: Where does packaging stand in total cost?

In short: Packaging material looks small, but box and fill decisions determine shipping and damage. All three need to be read together.

In the sample business, the business covers the shipping fee (free shipping assumption). The shipping fee is taken as ₺55 (small, 1 desi), ₺70 (medium, 3 desi) and ₺95 (large, 6 desi) depending on box size; these are sample rates. Under the current mix, 4,200 medium and 800 large boxes are shipped: shipping is 4,200 × 70 + 800 × 95 = 294,000 + 76,000 = ₺370,000. The damage rate is 1.2%: 60 orders. For a damaged order, the business pays again for the product (purchase cost ₺250), reshipping (₺70) and packaging (₺8): ₺328 × 60 = ₺19,680.

ChartMonthly breakdown of packaging, shipping and damage: shipping is most of the total
  • Packaging material₺42,9609.9%
  • Shipping fee₺370,00085.5%
  • Damage₺19,6804.5%

Prepared with sample values.

Packaging material is 9.9% of the total, shipping 85.5% and damage 4.5%. Haggling over material prices usually brings small gains; the real opportunity is in the box size that determines the shipping fee. You can audit desi differences on your shipping invoice with the method in the article how to check a shipping invoice.

Product pageFree Bookkeeping Software

Lesson 3: How does box size change the shipping fee?

In short: Every order should be shipped in the smallest box it fits in; an unnecessarily large box makes both material and shipping more expensive.

ChartBox and shipping cost per order by box size: the large box costs almost twice the small one
  1. Small box (1 desi)₺57.40
  2. Medium box (3 desi)₺74.80
  3. Large box (6 desi)₺103.50

Prepared with sample values. Small: 2.40 + 55; medium: 4.80 + 70; large: 8.50 + 95.

Under current practice, 2,000 orders that could fit in a small box go in a medium box. The difference for each: box 4.80 − 2.40 = ₺2.40, shipping 70 − 55 = ₺15, total ₺17.40. 2,000 × 17.40 = ₺34,800; of this, ₺4,800 is material savings and ₺30,000 shipping savings. If we assume the small box is 20 × 15 × 10 cm, its desi is 20 × 15 × 10 ÷ 3,000 = 1; medium is 30 × 20 × 15 ÷ 3,000 = 3, large 40 × 30 × 15 ÷ 3,000 = 6.

This calculation holds exactly only when the business pays the shipping fee. If the customer pays, the savings go into the customer's pocket; even so, cheaper shipping improves conversion and competitiveness. For how to set the free shipping threshold, see the article how to set a free shipping threshold.

Lesson 4: How much does fill reduce the damage rate?

In short: Fill is insurance against damage costs. For fragile products, extra fill pays for itself if the reduction in damage is greater than the cost of the extra fill.

In the example, 45 of the 60 damaged orders come from the fragile product group (1,500 orders, 3% damage) and 15 from the other 3,500 orders. If fill for fragile products is increased by ₺1.40 per order, damage drops from 3% to 1.2% (45 → 18 orders).

ItemAccountAmount
Extra fill cost1.500 × 1,402.100 ₺
Fewer damaged orders45 − 1827 orders
Damage savings27 × 3288.856 ₺
Net gain8.856 − 2.1006.756 ₺

The real cost of damage is higher than ₺328: customer dissatisfaction, negative reviews and the impact on seller rating are not included in this calculation. So ₺6,756 is a low estimate. For how to calculate damage cost in your own business, see the article how to track lost and damaged shipments; for the returns side, the article how to calculate return cost is useful.

The fill decision is made by product group: for durable products, extra fill only adds cost. First work out the damage rate by product group, test extra fill only in the high-damage group, and re-read the damage rate two months later.

Recommended readingHow to Do Order Picking and Packing?

Lesson 5: When does buying packaging in bulk pay off?

In short: Bulk buying lowers the unit price but increases average stock. It pays off if the discount is greater than the cost of the capital tied up.

After the small-box decision, medium box usage drops to 2,200 units a month. The supplier offers to cut the unit price from ₺4.80 to ₺4.40 for a three-month purchase (6,600 units).

OptionPurchaseAverage stockMonthly box cost
Monthly purchase2.200 × 4,80 = 10.560 ₺5.280 ₺10.560 ₺
Three-month purchase6.600 × 4,40 = 29.040 ₺14.520 ₺9.680 ₺

The monthly difference is ₺880. Average stock rises by 14,520 − 5,280 = ₺9,240; at a monthly capital cost of 2.5%, this costs ₺231. The net gain is 880 − 231 = ₺649. The condition for tripling the purchase quantity is that the discount is greater than the capital cost; if the discount were only 1% (₺4.75), the monthly gain would be about ₺106 and would not cover the ₺231 capital cost. If you are thinking of switching to a new box size, avoid bulk buying: unused boxes become dead stock straight away.

Lesson 6: How is packaging stock replenished before it runs out?

In short: Packaging material is an inventory item too. The reorder quantity should cover usage during the lead time plus a safety margin.

ItemDaily usageLead time + safetyReorder level
Small box≈ 677 + 3 = 10 days≈ 670 units
Medium box≈ 737 + 3 = 10 days≈ 730 units
Large box≈ 277 + 3 = 10 days≈ 270 units

Calculation: small box 2,000 ÷ 30 ≈ 67 units/day, 67 × 10 ≈ 670. The day packaging runs out, shipping stops: a workaround is found to pack the order (a bigger box, extra fill), and that workaround is the most expensive form of box selection error. To set a reorder alert from the item card, see the inventory management page. We explained how to calculate inventory in the article how to calculate inventory cost.

Lesson 7: How do you write a box selection rule?

In short: Box selection is not left to the packer's judgment; it becomes a simple, written rule based on the order's contents.

Order contentsBoxFill
1 small product or 2 thin productsSmall (1 desi)Standard
3–5 products or a single medium-sized productMedium (3 desi)Standard
Large or many productsLarge (6 desi)Standard
Fragile product (any size)By sizeExtra fill

The rule aims to prevent two things: unnecessarily large boxes and insufficient fill for fragile products. Linking the rule to the product card is the easiest way: if every product card says "box: small" or "extra fill: yes," the packer does not decide but simply applies it. We explained the whole order picking and packing process in the article how to do order picking and packing.

Lesson 8: How is packaging cost monitored?

In short: Monitor four indicators every month: packaging cost per order, box size mix, damage rate and billed desi variance.

ChartDrop in monthly cost: from ₺432,640 to ₺390,435
  1. Starting monthly cost₺432,640
  2. Small orders in small boxes−₺34,800
  3. Extra fill for fragile products−₺6,756
  4. Bulk box purchase−₺649
  5. New monthly cost₺390,435

Prepared with sample values. Total: 432,640 − 34,800 − 6,756 − 649 = ₺390,435. Monthly savings ₺42,205 (about 9.8%), annual ₺506,460.

IndicatorHow it is calculatedSample target
Packaging per orderMonthly packaging expense ÷ OrdersBelow ₺8.59
Box size mixBox type ÷ Total shipmentsSmall around 40%
Damage rateDamaged orders ÷ OrdersBelow 1.2%
Desi varianceBilled desi − Expected desiClose to zero
Takeaways from the exampleFour figures from the packaging cost example
  • ₺8.59packaging material per order
  • ₺34,800monthly gain from moving small orders to small boxes
  • ₺6,756net gain from extra fill for fragile products
  • ₺506,460total annual savings from the three steps

If cost per order is falling but damage is rising, fill has been cut too much. If the small box's share in the box size mix is below target, packers are choosing the medium box over the small one; remind them of the rule. If a desi variance appears, extra desi is being billed on your shipping invoice. To add these indicators to your weekly summary, see the article how to prepare a weekly management report.

What are the most common mistakes in managing packaging cost?

  1. Not seeing packaging as a total expense. Because the items stay on separate invoices, cost per order is never calculated.
  2. Keeping too few box sizes. Small orders go in large boxes and the shipping fee balloons.
  3. Filling empty space with void fill. Both fill and shipping costs rise.
  4. Cutting fill for every product. For fragile products, damage cost exceeds the fill savings.
  5. Buying more boxes than needed for a discount. The capital tied up and the risk of dead stock are forgotten.
  6. Not tracking packaging stock. When boxes run out, the workaround becomes the most expensive solution.
  7. Counting damage only as product cost. Reshipping and the impact on customers are left out.

How does NetKasam make the packaging and packing process easier?

  • Inventory items and reorder levels. You keep packaging material as an inventory item too and set a reorder quantity (inventory management).
  • Shipping integration. Orders are sent to the carrier with one click, a barcode is generated, and tracking information is passed to the customer (shipping integration).
  • Orders on one screen. You track marketplace and e-commerce orders in one panel and filter them by product (order management).
  • Expense records. You record packaging purchases as expenses and total them by category (expense management).
  • Saved reports. You save the monthly cost table and export it to Excel (reports).
  • Bookkeeping is free. e-Invoice, customer and supplier accounts, inventory, cash, bank and expense management are free in every plan; see the pricing page for details.

Mini quiz: Test what you have learned

In short: Answer the 5 questions below, then compare with the answer key. 4 or 5 correct shows you have completed the training.

  1. If the monthly packaging expense for 5,000 orders a month is ₺42,960, what is the cost per order (two decimals)?
  2. If a small box costs ₺2.40 plus ₺55 shipping, and a medium box ₺4.80 plus ₺70 shipping, what is the monthly gain from moving 2,000 orders to small boxes?
  3. Extra fill costs ₺1.40 for 1,500 orders, damage drops from 45 to 18 orders, and the cost per damage is ₺328. What is the net gain?
  4. If bulk buying lowers the unit price, when does the gain shrink?
  5. If daily box usage is 73, the lead time is 7 days and the safety margin is 3 days, roughly how many units is the reorder level?

Answer key:

  1. 42.960 ÷ 5.000 = 8,59 ₺ (8,592).
  2. (4,80 − 2,40 + 70 − 55) × 2.000 = 17,40 × 2.000 = 34.800 ₺.
  3. 27 × 328 = 8.856; 1.500 × 1,40 = 2.100; 8.856 − 2.100 = 6.756 ₺.
  4. If the discount is smaller than the cost of the extra capital tied up, or if the box size changes, the remaining stock becomes waste and the gain disappears.
  5. 73 × 10 = 730 units.

Frequently Asked Questions About Packaging Cost

How is packaging cost calculated?

The total of boxes, void fill, tape, labels and inner protective material used in a month is divided by the number of orders; this gives the packaging cost per order.

Why does packaging cost matter?

Material cost looks small, but box size determines the shipping fee and the amount of fill determines the damage rate; those two make up a much larger share of the total cost.

How does box size affect shipping cost?

The shipping fee is based on desi (volumetric weight); an unnecessarily large box raises the desi and the fee. In the example, shipping a small order in a medium box adds ₺17.40 in extra cost per order.

How is the amount of fill determined?

First, the damage rate is worked out by product group; extra fill is tested only in groups with a high damage rate, and the reduction in damage is compared with the cost of the extra fill.

Does buying packaging in bulk pay off?

It pays off if the discount is greater than the cost of the extra capital tied up. If box dimensions might change, bulk buying should be avoided.

How is damage cost calculated?

Product cost, reshipping cost and packaging cost are added up and multiplied by the number of damaged orders; the impact on customers is considered separately.

How is packaging stock tracked?

Packaging material is also kept as an inventory item; daily usage multiplied by the lead time plus safety days gives the reorder quantity.

How does NetKasam help with the packaging process?

It offers inventory items and reorder levels, shipping integration, orders in one panel, expense records and saved reports; bookkeeping is free.

Conclusion: Count which orders went out in a bigger box than needed this month

The most useful thing you can do today is count last month's orders by size and box type and find how many of the orders that could fit in a small box went out in a medium or large box. When you multiply that number by the box and shipping difference, you see your first savings item. The next step is to work out the damage rate for fragile products by product group and test fill in those groups.

Bookkeeping Is Now Completely Free

Manage your bookkeeping and e-Invoice operations with NetKasam without paying a thing. Customer and supplier accounts, inventory, collections and more in one panel, completely free.

Start FreeFree Bookkeeping Software

Read similar articles

19 free tools

Commission, shipping, VAT and profit calculations in your browser, no sign-up needed.

All tools