How do you use the Desi Calculator?
- Measure the outside of the box and enter the width, length and height in centimeters.
- If you wish, enter the actual weight on the scale in kilograms.
- If you ship several boxes of the same size, enter the quantity.
- Select the divisor in your shipping agreement: 3000, 4000, 5000 or 6000.
- Read the chargeable weight, the 3D box view and how desi falls as the height shrinks.
How is desi found?
Desi is the volumetric weight found by dividing the box's volume by the divisor; for domestic shipments the divisor is usually 3000.
Desi = Width (cm) × Length (cm) × Height (cm) ÷ divisor
In the rate table, fractional desi is rounded up to the next whole desi; the shipping fee calculator applies this rounding. The details of the method are in the how to calculate desi article.
Does desi or weight determine the fee?
The carrier compares desi with actual weight and bills the larger. The "chargeable weight" box in the tool is the result of this comparison, and below it states which one is decisive.
| Box | Desi (3000) | Actual weight | Charged |
|---|---|---|---|
| 50 × 35 × 20 cm | 11,67 | 6 kg | 11.67 desi |
| 20 × 20 × 10 cm | 1,33 | 5 kg | 5 kg |
| 30 × 30 × 30 cm | 9,00 | 9 kg | 9 (equal) |
In the first row the box is light but large; shrinking the dimensions lowers the fee. In the second row the product is dense; shrinking the box changes nothing, and weight determines the fee.
How much does shrinking the box save?
Height affects desi linearly: whatever percentage you reduce the height by, desi falls by that same proportion. The curve in the tool shows how the charged value changes as you shorten the height toward zero; if you entered the actual weight, the curve flattens at that level because weight comes into play.
As the box shrinks, you move down to the next desi step in the rate table; you can multiply this difference by your monthly shipment count and see the effect in the shipping tool.
What mistakes are made when measuring desi?
- You need to measure the outside of the box, not the product. Padding and tape allowance are also part of the box's dimensions.
- Side bulging. If there is too much padding, the box bulges in the middle; the value measured at the branch comes out larger than what you measured.
- Total volume calculation. Multiple boxes are not calculated as one box; each is measured separately. The quantity field in the tool is for boxes of the same dimensions.
- Wrong divisor. If the divisor in your agreement is not 3000, the result will be off; check it in the contract.
The desi you enter on the product card in a marketplace is produced by the same calculation; an incorrectly entered desi can come back as a deduction after shipment. For the effect of cost on the profit table, see the profit margin calculator.