EN
Shipping and Logistics

How to Pick and Pack Orders? Training on Picking Lists, Batch Picking, Barcode Checks and Error Rate

How do you pick and pack orders? Pick lists, batch picking, shelf layout, barcode checks and error rate: an 8-lesson warehouse course with examples.

Contents 14 sections
  1. What will you be able to do by the end of this training?
  2. Lesson 1: How do you set up an order pool and prioritize orders?
  3. Lesson 2: Which order picking method should you choose?
  4. Lesson 3: How much time does batch picking save?
  5. Lesson 4: How do you organize shelf layout and the pick list?
  6. Lesson 5: How does barcode verification lower the error rate?
  7. Lesson 6: How do you pack and choose the right box?
  8. Lesson 7: How do you manage the invoice, shipping label and handover process?
  9. Lesson 8: How do you measure speed and accuracy and set up a daily routine?
  10. What are the most common mistakes in order picking and packing?
  11. How does NetKasam make order picking and packing easier?
  12. Mini quiz: Test what you have learned
  13. Conclusion: Time 20 orders with a stopwatch today
  14. Frequently Asked Questions About Order Picking and Packing

At 9 a.m., 60 orders came in from the marketplace. The shipping cut-off time is 16:00. There are two of you in the warehouse, and you run between the shelves separately for each order; in the afternoon you realize a wrong product was shipped. In e-commerce, making the sale is half the job; handing the order to the carrier with the right product, in the right package and on time is the other half. This work is called order picking and packing.

This article is not a narrative but an 8-lesson practical course. We will answer the question how to pick and pack orders with numbers, working through picking methods, how batch picking cuts time nearly in half, shelf layout, barcode checks, box selection and the cost of the error rate using a single sample warehouse. At the end there is a mini quiz and a daily routine. For a definition of warehouse systems, see the article warehouse management system (WMS).

What will you be able to do by the end of this training?

In short: You will prioritize your orders, choose the right picking method, sort the pick list in shelf order, verify products by barcode, pack them in the right box and measure speed and error rate.

Course mapSix steps of an order's journey through the warehouse
  1. 01
    PoolOrders are gathered in a single list and prioritized by cut-off time.
  2. 02
    ListThe pick list is prepared in shelf order.
  3. 03
    PickingProducts are picked from the shelf and verified by barcode.
  4. 04
    PackageThe right box is chosen, the product is protected, and the invoice and label are added.
  5. 05
    HandoverThe package is handed to the carrier and the order status is updated.
  6. 06
    MeasurementTime, errors and return reasons are recorded.

The 8 lessons of the course: (1) order pool and priority, (2) picking methods, (3) time savings from batch picking, (4) shelf layout, (5) barcode verification, (6) packing and box selection, (7) invoice, label and handover to the carrier, (8) measurement and daily routine.

Lesson 1: How do you set up an order pool and prioritize orders?

In short: All orders from the store, marketplaces and the e-commerce site should be gathered in a single list and sorted by shipping cut-off time, delivery promise and order status. Picking orders from different screens means both delays and forgotten orders.

PriorityOrder typeWhy?
1Orders with a same-day shipping promiseMissing the cut-off time breaks the promise
2All orders close to the cut-off timeMust be shipped within the day
3Delayed and pending ordersRisk of customer complaints and negative ratings
4Orders requiring special handling (gift wrapping, fragile products)Prepared separately and carefully
5Other ordersPicked in spare time

In NetKasam, you see all orders from the sales platforms you have integrated on the order management pages, filter them and update their statuses from the bulk actions menu (can I manage my orders in bulk). To set up order processes from start to finish, see the article how to manage orders in e-commerce.

Lesson 2: Which order picking method should you choose?

In short: There are four basic methods: single-order, batch, zone and wave picking. If daily orders are few and the product range isn't wide, single-order picking; as orders grow, batch picking; in large warehouses, zone and wave picking are preferred.

MethodHow does it work?When is it appropriate?Note
Single-order pickingOne person picks one order from start to finishFew orders per day, large or special productsWalking time multiplies as orders grow
Batch pickingSeveral orders are picked in one round, then sortedMany small orders, repeated productsRisk of mix-ups during sorting; barcode is essential
Zone pickingThe warehouse is divided into zones, each person picks their own zoneLarge warehouse, many staffCombining items coming from different zones
Wave pickingOrders are divided into time slots (waves)Businesses with different shipping cut-off timesRequires a wave plan

For most small and medium-sized e-commerce warehouses, the practical start is moving from single-order picking to batch picking, because the gains grow quickly as orders increase (Lesson 3).

Lesson 3: How much time does batch picking save?

In short: Most picking time is walking. Picking several orders in the same round splits the walking; even though sorting takes extra time, net time usually drops significantly.

Example: there are 60 orders a day (the assumptions are chosen only to illustrate the method). Single-order picking takes an average of 3 minutes of walking and 1 minute of picking per order. With batch picking, we create 6 batches of 10 orders: 6 minutes of walking per batch, 1 minute of picking per order and 0.5 minutes of sorting per order.

FormulaSix formulas for picking and packing analysis
  1. Single-order time = Number of orders × (Walking + Picking)
  2. Batch time = Number of batches × (Walking + Batch size × (Picking + Sorting))
  3. Time per order = Total time ÷ Number of orders
  4. Accuracy rate = Orders shipped without errors ÷ Total orders
  5. Error cost = Orders with errors × Cost per error
  6. Volumetric weight (desi) = Width × Length × Height ÷ 3,000

Walking and picking times vary from warehouse to warehouse; find them by timing 20 orders with a stopwatch in your own warehouse.

ChartPicking 60 orders, from single-order to batch picking: from 240 minutes to 126 minutes
  1. Single-order picking: 60 × (3 + 1)240 minutes
  2. Time saved with batch picking−114 minutes
  3. Batch picking: 6 × (6 + 10 × 1.5)126 minutes

Prepared with sample values. The saving is about 47.5%.

ChartPicking time per order: falls as the batch grows
  1. Single order4.0 min
  2. Batch of 10 orders2.1 min
  3. Batch of 20 orders (8 min walking)1.9 min

Prepared with sample values. Batch of 20 orders: 3 × (8 + 20 × 1.5) ÷ 60 = 1.9 minutes.

The gain has a limit: if the batch gets too big, sorting gets confusing and errors increase. To start, batches of 10-20 orders with barcode verification are a good balance point.

Recommended ReadingHow to Do an ABC Analysis

Lesson 4: How do you organize shelf layout and the pick list?

In short: Put the best-selling products on shelves closest to the exit and at waist height, give every shelf an address and sort the pick list in shelf address order. That way staff move along a single route through the warehouse without doubling back.

  1. Do an ABC analysis: The most-ordered products (class A) go on the shelves closest to the exit; medium (B) and slow (C) products further away.
  2. Give shelves addresses: Fix the location of every product with an aisle, shelf and bin number (e.g., A-03-2).
  3. Keep the same SKU in one place: A scattered layout makes stock counting and picking harder. If multiple addresses are needed, define them in the system.
  4. Sort the list in shelf order: The pick list is prepared in shelf address order, not order sequence.
  5. Separate similar products: Products that look alike (color, size) should not sit side by side; mix-ups cause errors.

In NetKasam, smart sorting and staff assignment can be done during bulk order printing; for warehouse order picking, you can define your warehouse with its rules and leave the picking work to the system (order management). For stock by warehouse and branch, see the branch and warehouse management page. If you don't have a stock counting routine, shelf layout breaks down too; the guide how to do a stock count complements this.

Lesson 5: How does barcode verification lower the error rate?

In short: If every product's barcode is scanned during picking and packing, the wrong product, wrong size and missing units are caught by the system. Barcode verification is one of the most effective steps for lowering the error rate at the source; the table describes the control you get with any handheld terminal or software that scans barcodes.

Error typeWhy does it happen?How does barcode verification catch it?
Wrong productSimilar products getting mixed upWarning if the scanned barcode doesn't match the product on the list
Wrong size or colorVariants sitting on the same shelfEach variant has its own barcode
Missing unitsCounting errorEach unit is scanned individually
Extra unitsThe same product being added twiceWarning if the scanned quantity exceeds the order quantity
Wrong packagePacking several orders at the same timeThe label and order number are verified at the moment of packing
The cost of errorsError cost for a month of a thousand orders: lowering the error rate from 1% to 0.3% saves ₺1,050
  • 1%error rate (10 orders with errors)
  • ₺1,500total at a cost of ₺150 per error
  • 0.3%target error rate with barcodes (3 orders)
  • ₺450cost at the target error rate

The cost per error is an example: calculate your own figure as the sum of reshipping costs, return shipping, product loss of value and customer service time. For barcode management and defining multiple barcodes for products on different marketplaces, see the automatic multi-barcode feature on the inventory management page.

Lesson 6: How do you pack and choose the right box?

In short: The package should protect the product and ship it in the smallest suitable box. A box that's too big unnecessarily increases the desi, and therefore the shipping cost; a box that's too small damages the product and increases returns.

OptionBox dimensionsAccountDesi
Suitable box30 × 20 × 10 cm6.000 ÷ 3.0002 desi
Large box40 × 30 × 15 cm18.000 ÷ 3.0006 desi
Unnecessary difference4 desi
  1. Measure the product and choose the box: Determine the smallest suitable size; fill the empty space with filler material.
  2. Protect fragile products: Use corner protectors, bubble wrap or paper filler.
  3. Verify multi-item orders: Before packing, check the quantities and products once more by barcode.
  4. Add the invoice and documents: Place the invoice, waybill or return form in the package without fail.
  5. Seal and label: Tape and label should be easy to read.

You can see how the shipping fee is determined by desi and weight in the article how to calculate desi, and for a quick calculation, in the desi calculator tool.

Lesson 7: How do you manage the invoice, shipping label and handover process?

In short: When packing is done, the invoice should be issued, the shipping barcode created and the order status set to "shipped". Doing these steps in bulk shortens one of the longest tasks of the day.

  1. Bulk invoicing: Filter the prepared orders and complete invoice and e-Invoice operations in bulk.
  2. Shipping barcode: Send orders to the carrier in bulk, create the barcode and print the label.
  3. Handover: Hand over the packages before the shipping cut-off time.
  4. Status update: Update the order status; let tracking information go to the customer.

In NetKasam, you can filter your orders and convert them in bulk into waybill, invoice or e-Invoice processes (can I convert them to invoices in bulk), transfer them to the carrier with the shipping integration (how do I manage my shipping operations) and share shipment tracking information via WhatsApp, SMS or email (shipping integration). As order statuses change, workflows are created automatically and can be shared with the customer. To keep marketplace stock accurate after orders, see the article marketplace inventory sync.

Lesson 8: How do you measure speed and accuracy and set up a daily routine?

In short: Three indicators are tracked: order preparation time, accuracy rate and the number of orders that miss the cut-off time. Writing these down at the end of every day is the start of improvement.

IndicatorHow is it calculated?Target (example)
Preparation timeTime between receiving the order and handing it to the carrierSame day, before the cut-off time
Accuracy rateError-free orders ÷ total orders99.7% (sample target)
Delayed ordersNumber of orders that miss the cut-off time0
Time per orderTotal picking-packing time ÷ number of ordersMonthly decrease
Breakdown of error reasonsWrong product, missing units, damage, wrong addressAction on the top reason
When?What to do?
MorningOpen the order pool, print the pick list in priority order, assign staff
During the dayDo batch picking, verify by barcode, pack, invoice in bulk
Before the cut-off timeHand packages to the carrier, update statuses
At the end of the dayWrite down orders with errors and delays, mark the reason
WeeklyReview the error reasons, fix the shelf layout and procedure
Recommended ReadingHow to Send Order Updates to Customers: Choosing Stages and Channels, Shipment Tracking Links, Delay Messages and Measuring Support Load Guide

What are the most common mistakes in order picking and packing?

  1. Picking orders one by one. Walking time multiplies as orders grow.
  2. Issuing the pick list in order sequence. If it isn't in shelf order, staff double back in the warehouse.
  3. Skipping barcode verification. Wrong product and size errors become inevitable.
  4. Putting fast-selling products on distant shelves. Daily walking distance grows unnecessarily.
  5. Using boxes larger than needed. Desi and shipping costs go up.
  6. Managing the cut-off time without a buffer. A small hiccup makes you miss the day.
  7. Not recording the cause of errors. The same error repeats.

How does NetKasam make order picking and packing easier?

  • All orders on one screen. Marketplace and e-commerce site orders are gathered in one place, filtered and managed in bulk (order management).
  • Bulk printing and assignment. Invoices or order lists are printed in bulk, smart-sorted and assigned to staff.
  • Bulk invoicing. Orders are filtered and moved in bulk into the waybill, invoice or e-Invoice process.
  • Shipping integration. Orders are sent to the carrier with one click, a barcode is generated, and tracking information is passed to the customer (shipping integration).
  • Warehouse-based stock and users. Separate users and permissions are defined for each branch and warehouse; stock is tracked by warehouse (branch and warehouse management).
  • Bookkeeping is free. e-Invoice, customer and supplier accounts, inventory, cash, bank and expense management are free in every plan; see the pricing page for details.

Mini quiz: Test what you have learned

In short: Answer the 5 questions below, then compare with the answer key. 4 or 5 correct shows you have completed the training.

  1. If each order takes 3 min of walking and 1 min of picking, what is the time to pick 40 orders one by one?
  2. If the accuracy rate is 99.5% in a thousand orders, how many orders have errors; if each error costs ₺150, what is the cost?
  3. What is the desi of a 45 × 30 × 20 cm box (domestic, divided by 3,000)?
  4. Why is the pick list prepared in shelf order?
  5. What is the disadvantage of batch picking and how is it reduced?

Answer key:

  1. 40 × (3 + 1) = 160 minutes.
  2. 1,000 × 0.005 = 5 orders with errors; 5 × 150 = ₺750.
  3. 45 × 30 × 20 = 27,000; 27,000 ÷ 3,000 = 9 desi.
  4. Staff pass the shelves in sequence without doubling back on the route; walking time decreases.
  5. Orders can get mixed up during sorting; barcode verification and small batches reduce errors.

Frequently Asked Questions About Order Picking and Packing

How do you pick and pack orders?

Orders are gathered in a single list and prioritized, the pick list is prepared in shelf order, products are picked and verified by barcode, packed in the right box, the invoice and shipping label are generated, and the package is handed to the carrier before the cut-off time.

What is batch picking?

It is the method of picking the products of several orders at once in one round and then sorting them into orders. Because it splits walking time, it shortens the time in warehouses with many small orders.

Which picking method should you choose?

If there are few orders, single-order picking works; as orders grow, batch picking is suitable. Large warehouses use zone and wave picking. Measuring 20 orders in your own warehouse is the most reliable way to decide.

How do you lay out shelves?

Put the best-selling products on shelves close to the exit, give every shelf an address, keep the same product in one place and separate similar products from each other. ABC analysis determines which products go at the front.

Why is barcode verification important?

It catches errors such as the wrong product, the wrong variant and missing or extra units at the moment of picking and packing. It lowers the error rate at the source.

How is the accuracy rate calculated?

Divide the number of orders shipped without errors by the total number of orders. If there are 5 errors in a thousand orders, accuracy is 99.5%.

How does NetKasam help with order picking and packing?

It gathers all orders on one screen and provides bulk printing and staff assignment, bulk invoicing and shipping integration; as order status changes, workflows are created automatically and can be shared with the customer.

What should you do if the wrong product is shipped?

Contact the customer quickly, send the correct product, get the wrong product back, record the cause of the error (shelf, similar product, barcode not scanned) and correct the procedure.

Conclusion: Time 20 orders with a stopwatch today

Warehouse efficiency improves by measuring, not by feel. Today, measure the picking time of 20 orders, separate walking and picking times, do the same calculation for batch picking and print the pick list in shelf order. A week later, count the error reasons; the top reason will show you your first point to fix.

Bookkeeping Is Now Completely Free

Manage your bookkeeping and e-Invoice operations with NetKasam without paying a thing. Customer and supplier accounts, inventory, collections and more in one panel, completely free.

Start FreeShipping Integration

Read similar articles

19 free tools

Commission, shipping, VAT and profit calculations in your browser, no sign-up needed.

All tools