EN
Marketplace

How to Find Stuck Marketplace Orders? A Course on Stage Durations, Daily Counts, Causes of Delays, Resolution Order and Root-Cause Fixes

How do you find stuck marketplace orders? Stage time targets, daily counts, causes of delays and root-cause fixes: an 8-lesson guide with worked examples.

Contents 14 sections
  1. What will you be able to do by the end of this training?
  2. Lesson 1: What is a stuck marketplace order?
  3. Lesson 2: How are order stages and time targets set?
  4. Lesson 3: How are stuck orders counted daily?
  5. Lesson 4: How are causes of delay grouped?
  6. Lesson 5: In what order are stuck orders resolved?
  7. Lesson 6: How is a root-cause fix done?
  8. Lesson 7: What are the cost and the gain of stuck orders?
  9. Lesson 8: How are stuck orders monitored?
  10. What are the most common mistakes when managing stuck orders?
  11. How does NetKasam make finding stuck orders easier?
  12. Mini quiz: Test what you have learned
  13. Conclusion: Catch a stuck order by time, without waiting for an error
  14. Frequently Asked Questions About Stuck Marketplace Orders

An order comes in from the marketplace, but it does not reach the customer. The order waits somewhere in the system: its invoice has not been issued, the shipping label has not been created, or the tracking information has not been passed to the marketplace. These orders make no noise; nobody notices them unless someone complains. Yet each one lengthens delivery time, threatens the store rating and eventually forces someone to step in by hand.

This article is not a narrative but an 8-lesson practical course. We will answer how to find stuck marketplace orders through a sample business that receives 300 orders per day: the map of order stages, the expected time of each stage, the daily count of stuck orders, the distribution of causes, the resolution order, the root-cause fix, the cost and the monitoring indicators. At the end there is a mini quiz and an answer key. The times and costs are sample values chosen to show the method; follow the same steps by writing in your own business's targets.

What will you be able to do by the end of this training?

In short: You will define the order stages and time targets, find stuck orders every day, group their causes and eliminate the most frequent causes at the root.

Course mapSix steps to managing stuck orders
  1. 01
    MapWrite down the stages an order passes through.
  2. 02
    Set timesSet an expected time for each stage.
  3. 03
    CountList orders that exceed the time every day.
  4. 04
    GroupClassify the causes of delay.
  5. 05
    ResolveResolve orders from oldest to newest.
  6. 06
    Fix at the rootClose the two most frequent causes with data and rule fixes.

The 8 lessons of the course: (1) what a stuck order is, (2) stage map and time targets, (3) daily count, (4) distribution of causes, (5) resolution order, (6) root-cause fix, (7) cost and gain, (8) monitoring indicators.

Lesson 1: What is a stuck marketplace order?

In short: A stuck order is an order that has been waiting in the same stage for longer than the target time when it should have moved to the next stage.

Getting stuck mostly shows up not as an error message but as a silent wait. The order has reached the system but a piece of information is missing: the product code is not matched, the customer's tax information is missing, the address cannot be read or the transfer to the carrier has not been completed. So the way to find a stuck order is not to wait for an error but to watch the time.

Gathering orders on one screen is a prerequisite for this monitoring. For the general setup of order management, see the article how to manage orders in e-commerce. You measure how well orders are fulfilled on time with the article how to measure order fulfillment rate; the stuck order rate is a leading indicator that affects this performance.

Lesson 2: How are order stages and time targets set?

In short: Write down every stage an order passes through and set a "latest" time for each stage. An order that exceeds the time counts as stuck.

In the sample business, an order passes through five stages. Time targets are set according to the business's working hours and the carrier cutoff time:

StageWhat happens?Latest time (example)
1. ReceivedThe order arrives in the system from the marketplaceInstantly
2. ConfirmedInventory and product matching are checked1 hour
3. InvoicedAn e-Invoice or e-Archive invoice is issued4 hours
4. Handed to the carrierThe shipping record and label are created24 hours
5. Reported to the marketplaceThe tracking number is passed to the marketplace1 hour

Time targets are not fixed: an order that arrives after the daily cutoff time counts for the next day. Put the targets in writing and share them within the team. To measure handover time to the carrier separately, see the article how to measure and shorten handover time to the carrier. For the invoicing stage, check the times in the article within how many days is an invoice issued; the legal deadline and the internal target are different things, and the internal target should be shorter than the legal deadline.

Lesson 3: How are stuck orders counted daily?

In short: Every morning, list the orders that exceed the time target by stage and divide the total by total orders.

FormulaStuck order rate and daily cost
  1. Stuck order = An order waiting in a stage longer than the time target
  2. Stuck order rate = Stuck orders ÷ Total daily orders
  3. Daily cost = Stuck orders × Manual handling cost

Filtering orders by status and sorting by date reduces this count to a few minutes. The number of stuck orders by stage out of 300 orders in the example day is as follows:

StageStuck orders
Confirmed (matching, inventory)6
Invoiced (invoice information)21
Handed to the carrier (address, label)18
Reported to the marketplace3
Total48

The stuck order rate is 48 ÷ 300 = 16%. This rate means one in every six orders is waiting for human intervention. The stage with the high rate is the first place to look for a fix; in the example the invoice and shipping stages make up 81.3% of the total (39 ÷ 48).

ChartStuck orders pile up most at the invoice and shipping stages
  1. Invoiced21 orders
  2. Handed to the carrier18 orders
  3. Confirmed6 orders
  4. Reported to the marketplace3 orders

Prepared with sample values. Total of 48 stuck orders.

Lesson 4: How are causes of delay grouped?

In short: Give every stuck order a cause code; then rank the causes by count and percentage.

Code the causes from the start so that no "other" pile is left at the end of the count. In the example day, the causes of the 48 stuck orders are distributed as follows:

ReasonOrderShare
Product not matched (code, variant)18%37,5
Address or phone wrong or missing12%25,0
Invoice information missing (tax number, title)10%20,8
No inventory or insufficient inventory5%10,4
Other3%6,3
Total48%100
ChartDistribution of stuck orders by cause
  • Product not matched₺1837.5%
  • Address or phone error₺1225%
  • Invoice information missing₺1020.8%
  • No inventory₺510.4%
  • Other₺36.3%

Prepared with sample values. Total: 18 + 12 + 10 + 5 + 3 = 48 orders.

Percentages: 18 ÷ 48 = 37.5%; 12 ÷ 48 = 25%; 10 ÷ 48 = 20.8%; 5 ÷ 48 = 10.4%; 3 ÷ 48 = 6.3%. The first two causes make up 62.5% of the total (30 orders). This shows the problem is not a scattered error but a few recurring data problems. Most unmatched products come from products with variants; for details see the article how to manage products with variants on a marketplace. For inventory-related delays, the sellable inventory calculation in the article how to prevent overselling on marketplaces helps.

Lesson 5: In what order are stuck orders resolved?

In short: Resolve from oldest to newest, putting fast-delivery orders first; record every resolution with a cause code.

RankCriterionReason
1Those closest to the carrier cutoff timePrevents delay on orders that must ship today
2The oldest stuck ordersThose with the highest delivery time and store rating risk
3Groups stuck for the same causeOne fix unblocks several orders
4Those that require customer contactThose waiting for address or phone confirmation are batched last

Grouping orders stuck for the same cause saves a great deal of time: for example, when an unmatched product code is fixed, all pending orders for that product move forward in one go. You can filter orders and use the bulk action menu to update statuses, invoice and hand them to the carrier; for bulk invoicing, the steps in the article how to invoice orders in bulk are used.

Inform the customer quickly about an order that cannot be resolved. Sample notification texts are in the article how to notify customers about their orders. If cancellation is needed, the order is cancelled or partially cancelled; we explained how to do it in the article how to cancel an order.

Recommended readingHow to Manage Trendyol, Hepsiburada and n11 Orders on One Screen?

Lesson 6: How is a root-cause fix done?

In short: Close the two most frequent causes not order by order but with data and rule fixes: fix product matching once, and verify address and invoice information before the order.

Resolving every stuck order by hand removes the problem only for that day. A root-cause fix prevents the same problem from coming back tomorrow. The fix plan for the two large causes in the example is as follows:

ReasonRoot fixExpected impact
Product not matched (18)Match product codes and variants in a single catalog, and check the matching first thing when a new product is added80% of this cause is eliminated (14.4 orders)
Address or phone error (12)Run a checklist for every order that verifies the address fields before handing to the carrier80% of this cause is eliminated (9.6 orders)

A total of 30 orders were stuck for the two causes; 80% of that makes 24 orders. 48 − 24 = 24 stuck orders remain and the rate falls to 24 ÷ 300 = 8%. A second wave is planned for the remaining causes (invoice information, inventory, other): for invoice information, you can set rules such as making the customer's tax number mandatory at order time or, if it is absent, falling back to e-Archive.

Simplifying the product catalog reduces matching errors; for the method, see the article how to simplify a product catalog. For product card preparation, you can find code and variant rules in the article how to prepare a product card.

Lesson 7: What are the cost and the gain of stuck orders?

In short: The cost of a stuck order is the sum of manual handling time and delay risk. The gain from a root-cause fix is the number of orders prevented multiplied by this cost.

The manual handling cost is the time spent resolving an order multiplied by the hourly cost. In the example, ₺25 is taken per stuck order. The daily cost is 48 × 25 = ₺1,200; with 22 working days a month it comes to 1,200 × 22 = ₺26,400. If stuck orders fall to 24 after the root fix, the daily cost is 24 × 25 = ₺600 and the monthly cost becomes ₺13,200.

ChartMonthly effect of the root-cause fix: ₺13,200 saved
  1. Monthly cost of stuck orders (48 orders/day)₺26,400
  2. Cost of stuck orders prevented by the fix (24 orders/day)−₺13,200
  3. Monthly cost after the fix (24 orders/day)₺13,200

Prepared with sample values. Cost prevented: 24 × 25 × 22 = ₺13,200; remaining: 26,400 − 13,200 = ₺13,200.

The customer side is not included in this calculation. An order delivered late carries the risk of returns, negative reviews or rating loss; you can assess the monetary value of this risk separately with the article how to calculate cost per order and the article how to calculate the cost of manual order processing. Resolving every stuck order by hand is a "manual order" cost for the business and rises linearly as orders grow.

Lesson 8: How are stuck orders monitored?

In short: Track five indicators daily or weekly: stuck order rate, longest-waiting order, distribution of causes, delays by stage and resolution time.

IndicatorHow it is calculatedSample value
Stuck order rateStuck orders ÷ Daily orders%16 → %8
Longest-waiting orderAge of the oldest pending orderTarget: 1 working day
Cause distributionOrders per cause ÷ Stuck orders%37,5 / %25 / %20,8
Delays by stageStuck in the stage ÷ Entering the stageInvoice stage is highest
Resolution timeAverage time between getting stuck and resolutionTarget: 2 hours
Takeaways from the exampleFour numbers from the stuck order example
  • 16%daily stuck order rate (48 ÷ 300)
  • 62.5%share of the first two causes (30 ÷ 48)
  • ₺26,400monthly manual handling cost
  • ₺13,200monthly saving from the root-cause fix

Once monitoring is set up, add the indicators to the weekly management report; for its structure, see the article how to prepare a weekly management report. When order volume rises in campaign periods, the number of stuck orders rises too; for preparation, use the checklist in the article how to prepare for a busy campaign period.

Recommended readingHow to Calculate the Cost of Installment Sales? A Course on Virtual POS Rate, Net Collection, Commission per Installment and Single-Payment Discount

What are the most common mistakes when managing stuck orders?

  1. Waiting for an error. Getting stuck is silent; if time is not monitored, the order waits with nobody looking.
  2. Not setting a time target. When "late" is undefined, stuck orders cannot be counted.
  3. Not coding causes. Every order is resolved by hand and the same cause repeats every day.
  4. Only resolving one by one. Because the root cause is not closed, the cost recurs continuously.
  5. Uploading new products without checks. An unmatched code produces the first stuck order the same day.
  6. Not informing the customer. An order that cannot be resolved turns into a complaint and a return.
  7. Not assigning an owner. If the stuck order list belongs to nobody, it grows every day.

How does NetKasam make finding stuck orders easier?

  • Orders on one screen. All orders from marketplaces and your e-commerce site appear in a single panel; you filter by status and find the pending ones (order management).
  • Bulk actions. With the filters you choose, you can update order statuses, print, invoice and send orders to the carrier.
  • Automatic invoicing. If you wish, an order is invoiced automatically the moment it arrives in the system, reducing waiting at the invoiced stage (invoice tracking).
  • Shipping integration. It automatically passes orders to be dispatched to the carrier and reports the status to the marketplace (shipping integration).
  • Up-to-date inventory and product data. Product information and inventory statuses are kept up to date (marketplace integration).
  • Saved reports. You save the daily stuck order report and export it to Excel (reports).
  • Bookkeeping is free. e-Invoice, customer and supplier accounts, inventory, cash, bank and expense management are free in every plan; see the pricing page for details.

Mini quiz: Test what you have learned

In short: Answer the 5 questions below, then compare with the answer key. 4 or 5 correct shows you have completed the training.

  1. If 48 of 300 orders are stuck, what percentage is the stuck order rate?
  2. What percentage of the total of 48 are the 18 orders stuck because of product matching?
  3. If the cost per stuck order is ₺25, what is the daily cost (48 orders)?
  4. With 22 working days a month, how many ₺ is the monthly cost?
  5. If stuck orders fall to 24 after the fix, what is the monthly saving?

Answer key:

  1. 48 ÷ 300 = %16.
  2. 18 ÷ 48 = %37,5.
  3. 48 × 25 = 1.200 ₺.
  4. 1.200 × 22 = 26.400 ₺.
  5. (48 − 24) × 25 × 22 = 24 × 25 × 22 = 13.200 ₺.

Frequently Asked Questions About Stuck Marketplace Orders

What is a stuck marketplace order?

It is an order that has stayed in a stage longer than the expected time. For example, an order that should be invoiced but has passed four hours, or one that should be handed to the carrier but has passed 24 hours, is stuck.

How do you find stuck orders?

Set a latest time for each stage, filter orders by status and date, and list those that exceed the time. Refresh the list every morning and before the cutoff time.

Why do orders get stuck most often?

An unmatched product code or variant, a missing or wrong address and phone, missing invoice information and insufficient inventory are the most common causes. A business's own distribution is found from its records.

What should the stuck order rate be?

There is no universal target. First measure the current rate, then bring it down by fixing the two most frequent causes; in the example, the rate fell from 16% to 8%.

In what order should I resolve stuck orders?

First resolve those close to the carrier cutoff time, then the oldest. Group those stuck for the same reason and move them forward in one go.

How do I prevent getting stuck at the root?

Close the most frequent causes with data and rule fixes: fix product matching once, verify address and invoice information before the order, and upload new products with their matching checked.

How is the cost of a stuck order calculated?

A per-order cost is derived from the manual handling time and the hourly cost, then multiplied by the number of stuck orders. The risk of returns and rating loss caused by late delivery is assessed separately.

How often should I monitor stuck orders?

Daily. During busy campaign periods, check several times a day, and always before the cutoff time.

Conclusion: Catch a stuck order by time, without waiting for an error

The most useful thing you can do today is to write down your order stages, set a latest time for each, and count today's stuck orders. Then find the two most frequent causes with cause codes and close them not order by order but with lasting fixes such as product matching and address checks. As the stuck order rate falls, manual handling cost, delivery time and store rating risk improve together.

Bookkeeping Is Now Completely Free

Manage your bookkeeping and e-Invoice operations with NetKasam without paying a thing. Customer and supplier accounts, inventory, collections and more in one panel, completely free.

Start FreeMarketplace Integration

Read similar articles

19 free tools

Commission, shipping, VAT and profit calculations in your browser, no sign-up needed.

All tools